Sponsored

Motobilt Rear Crusher Bumper w/Light Cut Outs

4xnaz

Well-Known Member
First Name
Tim
Joined
Jul 4, 2018
Threads
28
Messages
455
Reaction score
1,101
Location
Phoenix, AZ
Website
www.instagram.com
Vehicle(s)
2018 JLU Rubicon
Vehicle Showcase
1
Installing soon but off to get coated first. Motobilt Rear Crusher Bumper with 3x3 light pod cut outs and Spare Tire Tag Relocation Kit and Camera Mount.

0326191148a_HDR~2.jpg
Sponsored

 
OP
OP
4xnaz

4xnaz

Well-Known Member
First Name
Tim
Joined
Jul 4, 2018
Threads
28
Messages
455
Reaction score
1,101
Location
Phoenix, AZ
Website
www.instagram.com
Vehicle(s)
2018 JLU Rubicon
Vehicle Showcase
1
Finished the install. Cerakote finish with the addition of Riged Industries Midnight Edition D2 cubes. I ran the wire through the passenger side frame rail and up into the engine bay to the pre-wired auxiliary switch. The rear camera use at night is way better and the before/after pic shows it.

0513192111~2.jpg


0513192112_HDR~2.jpg


0513192113_HDR~2.jpg


0513192114~2.jpg


20190513_222950.jpeg
 

WhyUMad

Well-Known Member
First Name
Ryan
Joined
Feb 19, 2019
Threads
15
Messages
156
Reaction score
84
Location
New Orleans, LA
Vehicle(s)
2019 Jeep Wrangler Unlimited Rubicon
Occupation
Mechanical Engineer
Looks great! I’m going with this setup without the led pod cutouts. Was it pretty much direct bolt-on?
 
OP
OP
4xnaz

4xnaz

Well-Known Member
First Name
Tim
Joined
Jul 4, 2018
Threads
28
Messages
455
Reaction score
1,101
Location
Phoenix, AZ
Website
www.instagram.com
Vehicle(s)
2018 JLU Rubicon
Vehicle Showcase
1
Looks great! I’m going with this setup without the led pod cutouts. Was it pretty much direct bolt-on?
Couldnt be any easier! Only 8 bolts total, 4 on each side in the factory OEM holes.

Install tip when doing it alone: keep the tailgate OPEN during the install. :)
 

Sponsored

WhyUMad

Well-Known Member
First Name
Ryan
Joined
Feb 19, 2019
Threads
15
Messages
156
Reaction score
84
Location
New Orleans, LA
Vehicle(s)
2019 Jeep Wrangler Unlimited Rubicon
Occupation
Mechanical Engineer
Couldnt be any easier! Only 8 bolts total, 4 on each side in the factory OEM holes.

Install tip when doing it alone: keep the tailgate OPEN during the install. :)
Awesome & thanks for the tip!
 

Signu616

Member
Joined
Feb 9, 2019
Threads
0
Messages
11
Reaction score
1
Location
Houston
Vehicle(s)
2019 Jeep Wrangler MOAB
Installing soon but off to get coated first. Motobilt Rear Crusher Bumper with 3x3 light pod cut outs and Spare Tire Tag Relocation Kit and Camera Mount.

0326191148a_HDR~2.jpg
/
Could you please share with me what tire carrier / reinforcement bracket you are using?
 
OP
OP
4xnaz

4xnaz

Well-Known Member
First Name
Tim
Joined
Jul 4, 2018
Threads
28
Messages
455
Reaction score
1,101
Location
Phoenix, AZ
Website
www.instagram.com
Vehicle(s)
2018 JLU Rubicon
Vehicle Showcase
1
/
Could you please share with me what tire carrier / reinforcement bracket you are using?
Sure. I'm using the Mopar Oversize Spare Tire relocation kit with the Mopar reinforced tailgate hinge.
 

ericpascual

Member
First Name
Eric
Joined
Apr 15, 2019
Threads
3
Messages
16
Reaction score
0
Location
Prince Rupert
Vehicle(s)
2019 Jeep Wrangler unlimited rubicon
Finished the install. Cerakote finish with the addition of Riged Industries Midnight Edition D2 cubes. I ran the wire through the passenger side frame rail and up into the engine bay to the pre-wired auxiliary switch. The rear camera use at night is way better and the before/after pic shows it.

0513192111~2.jpg


0513192112_HDR~2.jpg


0513192113_HDR~2.jpg


0513192114~2.jpg


20190513_222950.jpeg
Do you have an install video for the led pods? Are they 3 inches?
 
OP
OP
4xnaz

4xnaz

Well-Known Member
First Name
Tim
Joined
Jul 4, 2018
Threads
28
Messages
455
Reaction score
1,101
Location
Phoenix, AZ
Website
www.instagram.com
Vehicle(s)
2018 JLU Rubicon
Vehicle Showcase
1
Do you have an install video for the led pods? Are they 3 inches?
No video, I'm sorry but its very simple. 3x3 pods using a surface mount. They will hang upside down on the inside of the Motobilt bumper. I grounded at the tow hitch and fished the power wire, with a metal coat hanger, through the inside of the passenger frame rail, up into the engine bay and over to the pre-wired bundle for the Aux Switches by the battery.
 

Sponsored

ericpascual

Member
First Name
Eric
Joined
Apr 15, 2019
Threads
3
Messages
16
Reaction score
0
Location
Prince Rupert
Vehicle(s)
2019 Jeep Wrangler unlimited rubicon
No video, I'm sorry but its very simple. 3x3 pods using a surface mount. They will hang upside down on the inside of the Motobilt bumper. I grounded at the tow hitch and fished the power wire, with a metal coat hanger, through the inside of the passenger frame rail, up into the engine bay and over to the pre-wired bundle for the Aux Switches by the battery.
Did you use any wire loom to protect the wire from the outside elements?
 

ericpascual

Member
First Name
Eric
Joined
Apr 15, 2019
Threads
3
Messages
16
Reaction score
0
Location
Prince Rupert
Vehicle(s)
2019 Jeep Wrangler unlimited rubicon
Finished the install. Cerakote finish with the addition of Riged Industries Midnight Edition D2 cubes. I ran the wire through the passenger side frame rail and up into the engine bay to the pre-wired auxiliary switch. The rear camera use at night is way better and the before/after pic shows it.

0513192111~2.jpg


0513192112_HDR~2.jpg


0513192113_HDR~2.jpg


0513192114~2.jpg


20190513_222950.jpeg
What powder coat finish did you go with regular textured black or satin black?
 

Cptbigdog

Well-Known Member
First Name
Eddie
Joined
Sep 10, 2020
Threads
9
Messages
49
Reaction score
9
Location
Bakersfield
Vehicle(s)
Jl Rubicon
Did you go with this spot version/ pattern light of the rigid lights
Sponsored

 
 



Top