flight4f
Well-Known Member
I have this exact same Issue, I have Tried fixing this for weeks, I have driven for hours in hopes the system will “learn” as the dealer ship called it. The dealer has had so many people complain about this and have no fix I guess. The TPM codes always come back after and turn the light back on after the dealer clears the codes, the codes are :See picture below, which appears to be contradictory. I bought 5 new TPMS sensors when I stalled my 37's about a month ago, everything worked perfectly. About a week ago, TPMS warning light went off. I did take a bit of air out of the tires went I went offroad, but the pressure was still set to about 28 psi. I have a Tazer Lite that is currently set to 25 PSI.
What am I missing? How can I get the TPMS warning light, but all 4 tires read an accurate pressure? I have noticed the Tazer is a bit glitchy. For instance, sometimes the ESS light doesn't come on even though I have it set to do so. This isn't a huge issue, just annoying. Any suggestions would be outstanding.
TPM C1580 Left/Right side Tire Sensor Location Undetermined,
TPM C1581 Front/Rear Tire Sensor Location Undetermined,
TPM C151D Tire Pressure Sensor Location Undetermined,
BCM U1514-87 Engine Controller Secret Code-Missing Message.
The Tazer doesn't read the TPM or BCM codes for me to reset, Seeing how Jeep has no fix for this in sight, Im hoping because the PSI reads correctly on the display Tazer will add a setting to leave the display for the TPMS active but disable the light.
Sponsored