They probably look like this.......Sweet! Thx man! I contacted fox evidently there are supposed to be upper mount spacers too which I never got. They are mailing me both upper and lower spacers.
Please post when they come in; as perhaps this is something I'm missing..... Wish the instructions had a parts list....I had collars installed on mine on the top shock mount but I think they are slightly more narrow than spec
I was slightly exaggerating lol but yeah 75/80 but it looks like ya deff gave those a few extra ugga duggas! hahaHaha they did??? Haha oem torque is 81 ft lb top and 75 bottom shock mount
I think that is for the old; original crush sleeve tubes; that are very very thin tubs pushed into the rubber lower bushings. I've seen pictures of this on the fox site.I got the crush sleeves/step washers from fox. I stumbled on this thread on another forum and think it’s very helpful. Basically we need new crush sleeves and the torque should be 60-65 for lbs for both top and bottom shock bolts
https://[Banned Site]/showthread.php?2315-Torque-settings-for-Fox-shocks-in-the-Dynatrac-2-quot-Lift&highlight=plush coils
Edit I forgot I can’t link the other site but if you use the above url info you will find it. Basically the Dynatrac lift fox shocks had the same lack of correct step washer crush sleeve so Dynatrac and fox worked together to get revised ones. They also worked with fox engineering and the fox shocks torque only require 60-65 for lb too and bottom bolts...NOT he factory 81/74.
Unfortunately my shocks which were manufactured 12/2018 did not have the updated step washers. Same with a few other folks from page 1.I think that is for the old; original crush sleeve tubes; that are very very thin tubs pushed into the rubber lower bushings. I've seen pictures of this on the fox site.
My shocks don't have that tube but instead have the step washers pushed into the rubber lower tube.
Yeah they are definitely not the ones for the Dynatrac lift are 177 178 which are the 2-3”. Im just saying that the 0-1.5” oem replacement fox shocks had the same problem as the original Dynatrac lift shocks and that thread has interesting info.I do not think those are the same shocks as discussed in the posted thread regarding the Dynatrac Fox shocks. Maybe they did not transfer the change to those shocks.
If you have not read the whole thread (from the banned site) yet, get popcorn and aspirin - it is a great read...