Anyone use Beamtech H13, 10k lumen hi/lo 9008 bulb in Halogen housing

[WyoTex]

what's the procedure for adjusting the light?

two yellow screws to the outside of the headlight under the hood, uses a philips screwdriver, I can remember with clockwise or counter clockwise is up or down but a quick google search will give you the answer, pretty ease to do

Sponsored

 

[cosine]

just curious, any updates. i'm thinking of getting these (8 or 10k) or the supernova. v4.

 

[WyoTex]

I still love my beam techs, saved me from whacking a couple of deer tonight while coming off the mountain tonight while crawling around bear hunting.

 

[RenegadeJeeper]

Beamtech all the way.

 

[MyJlU]

Mine

 

[cosine]

wyo tex / myjlu, by the looks of the pics the headlights throws a fair amount light to the side. are the 10k bulbs are dot and street legal. i had to ask.

 

[WyoTex]

far as I know, i just know they work and i don't get flashed

 

[MyJlU]

wyo tex / myjlu, by the looks of the pics the headlights throws a fair amount light to the side. are the 10k bulbs are dot and street legal. i had to ask.

They don’t throw light all over the place, the pattern is tight and they work very well. One of my car buddy’s commented that they look better than some aftermarket JK headlights. As far as being dot compliant your housing is and I don’t see this being an issue. Over all I’m happy with all my LED lighting and saved a ton of money for other mods.

 

[Rufus]

Did my first nighttime driving this weekend, including through a pretty good downpour and on unlit streets. As everyone here knows the stock halogens are horrible. The high beams barely made a difference. I didn’t notice the fog lamps too much either. Thanks for everyone who posted about the Beamtechs, I’ll be ordering them, probably the 8500s.

 

[fightingmajor]

Does anyone have your amazon links still to replace all of the lights on a JLUR?

 

[WyoTex]

i only replaced headlight bulbs, would be interested in a package set of links to the others if someone has it, still need to upgrade my wife headlights as well. Just doesn't seem as urgent since its not mine. hehe

 

[fightingmajor]

Swapping these out, does it require using the Tazer?

 

[WyoTex]

Swapping these out, does it require using the Tazer?

No it was truly plug, turn on and adjust, to make certain to adjust them, at least I had to, not a big deal

 

[MyJlU]

No it was truly plug, turn on and adjust, to make certain to adjust them, at least I had to, not a big deal

Remember to make sure the bulbs are clocked in the right position

 

[Fatman]

First off, THANK YOU Wyotex for putting up with my stupidity. Installed and very impressed, although just a minute ago the wife backed out and the auto lights where on, the headlights look perfect although the yellow fog lamps look like a cats ass.
I see that the fogs are PSX24W, I cannot find any with a resistor built in and I really dont want to cut and splice anything, just how I roll, has anyone changed the fogs without a resistor and if so what did you use?
I also ordered some LED bulbs for my Corvette, they flicker forever and the headlights wont go down unless I put the high beams on then turn the lights off, I'll deal with that until I can research a better cure, LED vs traditional is AMAZING.

Sponsored