drock317
Well-Known Member
- First Name
- Derek
- Joined
- May 29, 2018
- Threads
- 7
- Messages
- 149
- Reaction score
- 158
- Location
- Indianapolis, IN
- Vehicle(s)
- 2018 JLUS - Ocean Blue
- Thread starter
- #1
Have a Sahara JL and have some Rubicon suspension take offs and plan to put the RC spacer lift on it.
Would like to run some 18x9 rims with a 35 x12.50 tire and have a +12 offset.
Curious if anyone has ran a wheel similar. I know on the JK you needed the 4.5" backspacing and -12 to -18 offset but I just don't like how far it sticks out.
This website makes it look like it would get me away from the shock just a tiny bit and basically it would just be 2.5" wider than my current setup. So it might stick out a little but not much.
Seem right? If anyone has done this setup on a Rubicon any issues with rubbing while going off road?
Would like to run some 18x9 rims with a 35 x12.50 tire and have a +12 offset.
Curious if anyone has ran a wheel similar. I know on the JK you needed the 4.5" backspacing and -12 to -18 offset but I just don't like how far it sticks out.
This website makes it look like it would get me away from the shock just a tiny bit and basically it would just be 2.5" wider than my current setup. So it might stick out a little but not much.
Seem right? If anyone has done this setup on a Rubicon any issues with rubbing while going off road?
Sponsored