ROAM Side Steps light wiring (or any step lights with door open illumination.)

[boogie]

Awesome, for others interested in doing the same where did you tap into exactly? Let us know how it holds up. These LED's draw very little power, but my fear of the sensitive electronics on these newer vehicles made me want to go through a relay

I have the relay ready on my bench in case it starts acting up

Sponsored

 

[boogie]

They are bright

 

[JK47]

I have the relay ready on my bench in case it starts acting up

Nice, but where exactly did you tap in?

 

[boogie]

Nice, but where exactly did you tap in?

Under the dash on both sides. The dome lights

 

[Ewok]

Switched the led’s out for red ones. Followed these instructions and everything went smooth.

 

[RAZA]

Switched the led’s out for red ones. Followed these instructions and everything went smooth.

That looks absolutely fantastic!

 

[Shamus13]

Switched the led’s out for red ones. Followed these instructions and everything went smooth.

Nice Crocs

 

[Dudeman]

Nice Crocs

Which LEDs did you buy? Amazon?

 

[TTEChris]

Which LEDs did you buy? Amazon?

Search Amazon for 23mm eagle eye LED's. I considered doing amber so that they can stay lit at any time. After seeing how bright the white lights are i was worried about blinding low cars even with the amber lights.

 

[Dudeman]

Search Amazon for 23mm eagle eye LED's. I considered doing amber so that they can stay lit at any time. After seeing how bright the white lights are i was worried about blinding low cars even with the amber lights.

Right on... thanks for the info!!

 

[18RubiJLU]

I did the install yesterday, built own harness using 16gauge wire...steps look great! (sorry Rubicon needs cleaning, had a rainy week here).
Chris - thanks for the thread!

 

[Ewok]

YINTATECH Universal
10pcs High Power White 9w Led Eagle Eye Bumper DRL Fog Lights Motorcycle Lights Daytime Running DRL Tail Backup Light Car Motor Clearance Marker Lights

I bought these in red

 

[BLU3TURF]

Finished the install the lights today. I wasn’t a fan of the stock LEDs because I broke one while screwing them in so I changed them all out. I opened the holes out to 3/4” so I can use side markers from my favorite USA LED company. I used a step drillbit on 3 of them but the fourth was harder and had to use a 3/4 drill bit.
Special Thanks to @TTEChris and @boogie for some ideas on how to install them.

 

[Courtjester69]

Does the SS relay get hot ? They sell it with a heat sink. Has any had a problem with the relay ? I just want to make sure before I order it. Thanks guys

 

[jbeiker]

They are bright

I love the fade in and out of this set up! How did you wire it up? Just tap right into the wiring for the dome light?

Sponsored