The straps are for when it's in sunrider position.Thanks for posting the video. Installed it today in just over 30 minutes.
Couple questions,
Anyone actually use the straps to roll up the rear window?
Do most put the top bolts back in the tub rails or not?
Any issues stretching the top to the front latches on first install, I'm about 1/2" short?
Is there any use in keeping the protective cover it is wrapped in out of the box?
There are loop straps that snap above rear window. Wasn't sure if anyone's has used theseThe straps are for when it's in sunrider position.
First install, I had to have my wife pull/hang from the top to get it to close. It was very tight!
I kept the cover for when I take it off in the winter.
I had two sets of straps. One to hold the top down in the Sunrider position, and the second are to hold the rear window when it is "rolled" up. Since you can't really roll it up, those second set of straps (w/ a snap on them) are kind of useless. I got the rear window to "loop" up but not much else. See pics.The straps are for when it's in sunrider position.
First install, I had to have my wife pull/hang from the top to get it to close. It was very tight!
I kept the cover for when I take it off in the winter.
Ah that's right, I haven't used those since you can't really roll up the windowsThere are loop straps that snap above rear window. Wasn't sure if anyone's has used these
That is what I thought.Ah that's right, I haven't used those since you can't really roll up the windows
Everything has to come off except for the 2 brackets on the rear down-angle sport cage.Dual top question: When you install the soft top hardware, then switch back to the hard top in the winter, do you have to remove anything besides the soft top canopy section to switch to the hard top? Is there plenty of room between the installed tracks for the soft top, etc. and the hard top?
Thanks for the fast replies MacombRoger and fdisker2000.You have to remove everything except the metal brackets that attach to the rear rollbars. Door surrounds and tailgate bar holders will need to be removed.