swflfireguy
Well-Known Member
Installed Axiom sequential turn signals and added a 3/4" spacer to the front to level out the TeraFlex 2 1/2" lift.
The price is back up to $799 and they're out of stock for the season. Phew.We use the Mr Buddy Heater and it works great - but does drink propane quickly. I have some pics on here somewhere showing it in use.
I like how that doesn't hinder getting to the jack. With Goose Gear's you have to use an allen wrench to gain access to your jack, which seems pretty damn stupid.Decided to change out my rear AAL MASS platform for there new MASS Plus platform. I like the amount of tie-downs the current platform has but never liked how many 'holes' there were for things to fall into. Plus my ARB twin air is in the rear cubby. With the current setup you have to fully remove the panels to get to it for repair. The doors will be nice (can be accessed with a fridge slide still too). Also added the overhead molle panel since I will be mounting my comm's there. Images below are from AALs website, probably going to take a while to show up.
Also, really want to figure out a way to wire up a Concord Aerospace Apollo switch panel to the overhead platform. I already have a SPod but thinking maybe using the Apollo switches for the radio and maybe speaker? Maybe a secondary overhead light? not sure yet, just love the switches.
Still getting used to how 'warm' the winter is here! Back in MN the hose would have been put away in late October early November, the outdoor faucets all shut off and drained (20ft into the house), and the thought of frozen pipes would still be in the back of my mind all winter... Got to say, much prefer WA (for many, many reasons)...Sorry MN'otansI draw the line doing anything with my hose under 45deg.
Yup, its a nice feature. I'm hoping the jack location is as easy to access as the current platform. From the photos it looks to be about the same distance to the rear. Plus I can get the 'upgrade' kit since my current support mount bars work with the new one. I think I might use my current platform in the garage as a wall board (mount items with the dogbone connectors).I like how that doesn't hinder getting to the jack. With Goose Gear's you have to use an allen wrench to gain access to your jack, which seems pretty damn stupid.
@MedskerSo @Rhinebeck01 where can I get a set. I made something similar by screwing some angle on a couple of my plugs but that looks a lot better than mine.
there is another maker i know of that has the files online to print , which is hereI guss we'll have to see what he decides. I'd love a set and have yet to purchase a 3D Printer. It's on my Christmas List but I don't think Santa is bringing it this year
Any chance you want to share your make with @Threedom ? I don't have a 3-d printer either, but if they work, I would be interested in a set too.there is another maker i know of that has the files online to print , which is here
https://www.printables.com/model/164254-jeep-jl-wranger-front-windshield-air-diverter
they are very similar to the ones i sent to rhinebeck01 . i dont really upload my makes to the sites, they are more specific to stuff i need .
i could print a set if you know your not getting a printer , no big deal , i dont have loads of time to print/sell /ship stuff , this is why i dont sell my makes .
and if you need any pointers on printers or anything let me know . there are alot of cheap printers that print good for new makers
the link i posted can be used to download the file and can be used to have it printed .Any chance you want to share your make with @Threedom ? I don't have a 3-d printer either, but if they work, I would be interested in a set too.