GATORB8
Well-Known Member
Alright, y’all, picked up the 4xe Friday, here’s what I’ve got so far.
Rugged Ridge HD front bumper - fits but had to hog out the top outer bumper mount holes to match the others. I’m not sure if this is specific to our frame, but those two holes were more narrow than the others. Superwinch SX1000SR mounted with no issues (although tight). No issues with installing the LED fogs.
Rugged Ridge HD rear bumper - no install issues, but I’m troubleshooting some sensor false alerts. My sensors are in heat welded plastic clips and NOT in the three piece mounts you see in videos. Allows clearance of 35 spare on stock mount.
Mopar grab handles, cravenspeed antenna, RC tag relocation- no install issues
35x12.50R17 KO2s on 17x8.5 +18mm fit with no rub on road.
Surf Blue Pearl is a perfect match to the factory decals, thanks to @eLECTRICON for the knowledge there.
Hopefully I’ll have time to do the lift this weekend: Teraflex 1.5 Performance Spacer and 2” Shock Extensions; Mopar LCA, Sway Bar Extensions, and Bump Stop Extensions.
Rugged Ridge HD front bumper - fits but had to hog out the top outer bumper mount holes to match the others. I’m not sure if this is specific to our frame, but those two holes were more narrow than the others. Superwinch SX1000SR mounted with no issues (although tight). No issues with installing the LED fogs.
Rugged Ridge HD rear bumper - no install issues, but I’m troubleshooting some sensor false alerts. My sensors are in heat welded plastic clips and NOT in the three piece mounts you see in videos. Allows clearance of 35 spare on stock mount.
Mopar grab handles, cravenspeed antenna, RC tag relocation- no install issues
35x12.50R17 KO2s on 17x8.5 +18mm fit with no rub on road.
Surf Blue Pearl is a perfect match to the factory decals, thanks to @eLECTRICON for the knowledge there.
Hopefully I’ll have time to do the lift this weekend: Teraflex 1.5 Performance Spacer and 2” Shock Extensions; Mopar LCA, Sway Bar Extensions, and Bump Stop Extensions.
Sponsored