Initial impressions of my Mickey Thompson Baja Boss AT’s

[dshark1]

For future reference, what’s the biggest tire size I can go with the AT Mickey”s while keeping stock Rubi wheels? Just thinking, I will go with these once my KO2”s need changing. Thx in advance.

Sponsored

 

[DadJokes]

For future reference, what’s the biggest tire size I can go with the AT Mickey”s while keeping stock Rubi wheels? Just thinking, I will go with these once my KO2”s need changing. Thx in advance.

Surmising by Mickey Thompson’s minimum recommend width, a 295.

 

[dshark1]

Surmising by Mickey Thompson’s minimum recommend width, a 295.

Thx

 

[blnewt]

Or

Surmising by Mickey Thompson’s minimum recommend width, a 295.

you can run those 35" pizza cutters in 10" width (35x10R17 or 255/85/17) too!
https://www.mickeythompsontires.com/light-truck-tires/baja-boss-a-t

 

[dshark1]

Or

you can run those 35" pizza cutters in 10" width (35x10R17 or 255/85/17) too!
https://www.mickeythompsontires.com/light-truck-tires/baja-boss-a-t

Definitely need more footprint then that.

 

[blnewt]

Definitely need more footprint then that.

Yeah, I think they're the narrowest of all the 35s now, the Kenda Klever RT in a 35x10.5 was the previous big skinny

 

[qnet]

I just measured my 33" Micky Thompson's on my jeep and they actually measure right at around 32" maybe slightly more. If the 35" Mickey Thompsons discussed here are actually 34" i'm fine with that.

Someone mentioned earlier in the thread (I believe blnwet) that the sizes are proportional as they move up.

 

[DadJokes]

Mine is advertised at 34.5” tall. I presume that’s a “35” even though the mounted height is under 34”. When I program 34.5” into the Tazer…. It’s oddly spot on.

 

[qnet]

Mine is advertised at 34.5” tall. I presume that’s a “35” even though the mounted height is under 34”. When I program 34.5” into the Tazer…. It’s oddly spot on.

That's good to know.

 

[backs1de]

So anyone gone wheeling with these tires yet?

I have they perform great! Here is my review of them.
https://www.jlwranglerforums.com/forum/threads/37”-mickey-thompson-baja-boss-a-t-review.76607/

 

[qnet]

Got the Boss A/T's installed today. I like them so far, and they're actually quieter than my Baja ATZ 33's . I set my tire diameter to 34.5 using the Tazer JL and it rides smooth. I also measured the tires with a straight across the very top center as I could get, and they do actually measure 34.5".

 

[D60]

Got the Boss A/T's installed today. I like them so far, and they're actually quieter than my Baja ATZ 33's . I set my tire diameter to 34.5 using the Tazer JL and it rides smooth. I also measured the tires with a straight across the very top center as I could get, and they do actually measure 34.5".

Your Tazer doesn't care what the tire is doing from centerline to top. All that matters is CL to the ground, thus static loaded radius (not diameter)

Static loaded radius x 2 is what the vehicle "sees" as actual diameter

 

[Riggs]

I am pretty happy with Clayton lift and tires, but have only put a 100 miles on them so far. I measured the tires with a level across the top. They came in at about 33.75 inches. The tires are currently running at 35 psi, which is pretty firm. I will be lowering them down to 32 psi. The tires seem to be pretty quiet so far.

 

[Datjeeptho]

Just had these finally put on in a 37. Lift coming later this week.

 

[Clayton Off Road]

I am pretty happy with Clayton lift and tires, but have only put a 100 miles on them so far. I measured the tires with a level across the top. They came in at about 33.75 inches. The tires are currently running at 35 psi, which is pretty firm. I will be lowering them down to 32 psi. The tires seem to be pretty quiet so far.

Looking good! What size lift and tires?

Sponsored