Sooner7274
New Member
- First Name
- Tony
- Joined
- Jul 17, 2021
- Threads
- 0
- Messages
- 4
- Reaction score
- 4
- Location
- Rio Rancho, NM
- Vehicle(s)
- 2019 JLU Punk'n
Hi Sting & all,
I've followed this thread and still stuck. It feels like a simple thing I'm overlooking
I have a 2019 JLU 7" screen and non factory amplified. Purchased the AP4-CH41R.2 bundle from Amazon. It came with APH-CH01 harness and TOSLINK (although I'm not using that part).
I have hooked this up to the radio and ran 3 sets of RCAs to amp (kicker kxa800.5). Silly question but where does the amplified signal tie back to the speakers? Do I run new line to each one of them or is there a harness in B pillar or elsewhere? New kicker speakers run to all stock locations.
My APH-CH01 has me suspicious and second guessing. Kit came with 2 black 16-pin harnesses along with a white 22-pin harness. PAC website says CH01 is not compatible with JLs but I read others have gotten it to work or the harness isn't needed at all.
Thanks in advance for the help.
Need help will travel....
Tony
I've followed this thread and still stuck. It feels like a simple thing I'm overlooking
I have a 2019 JLU 7" screen and non factory amplified. Purchased the AP4-CH41R.2 bundle from Amazon. It came with APH-CH01 harness and TOSLINK (although I'm not using that part).
I have hooked this up to the radio and ran 3 sets of RCAs to amp (kicker kxa800.5). Silly question but where does the amplified signal tie back to the speakers? Do I run new line to each one of them or is there a harness in B pillar or elsewhere? New kicker speakers run to all stock locations.
My APH-CH01 has me suspicious and second guessing. Kit came with 2 black 16-pin harnesses along with a white 22-pin harness. PAC website says CH01 is not compatible with JLs but I read others have gotten it to work or the harness isn't needed at all.
Thanks in advance for the help.
Need help will travel....
Tony
Sponsored