SSWIM
Well-Known Member
Stock gearing. Around 12-13 around town.Sam, What did you do to fit the 40's on besides wider wheels with offset? Are you running the stock gearing and what kind of mileage are you getting?
Sam
Sponsored
Stock gearing. Around 12-13 around town.Sam, What did you do to fit the 40's on besides wider wheels with offset? Are you running the stock gearing and what kind of mileage are you getting?
2.5” spacer kit. Sway bar links. Nothing else. Drives GREAT.Forgive me if you have already mentioned this, but what changes did you make, if any, to the coil springs, sway bar links, control arms, etc.? Thanks!
Got it. Do you think you will change to longer coil springs at some point?2.5” spacer kit. Sway bar links. Nothing else. Drives GREAT.
Sam
Got it. Do you think you will change to longer coil springs at some point?
Not at this time. I am really happy with the ride and it is still “low” enough. We will use the 392 for “moderate” wheeling. Mostly exploring. Any hard core stuff is left to the JK and SXS.Got it. Do you think you will change to longer coil springs at some point?
That is Killer looking!! Was looking at those Fuel Rebel 6's and might have to go with those Beadlocks! Granite is my favorite! My HC, JGC, and 392 all Granite.Mopar beadlock wheels on 35” tires
Yeah, definitely skid plates. Low profile oil pan drain bolt too.Here is my list as of today. If anyone can chime in and let me know if I am missing any necessary parts or have suggestions. My estimate ship date is July 31st and I would like to have everything ready to go by the time I pick up my 392.
Ordered
Waiting to Order
- Interior
- Authentic Mopar Grab Handles Front & Rear Pair
- Authentic Mopar Door Sill Guards 4 Door Stainless Steel
- Seat Cushion for Road Trips
- Ram Mounting System for Phone & iPad
- All Weather Floor Mats
- Exterior
- Stubby Antenna by Antenna X
- Fender Vent Blackout Decal with Gold by Pixel Decals
- Will be removing the Wrangler decal sticker
- Lighting
- Authentic Mopar LED Off-Road Light Mounting Bracket Winch Guard
- Baja Designs LP6 Pro Driving/Combo LED Light Combo
- Baja Designs LP9/LP6 Pro Wiring Harness
- Authentic Mopar Mounting Bracket Lower A-Pillar
- Baja Designs Squadron Pro Amber Wide Cornering LED Combo
- Front Bumper
- Authentic Mopar Winch & Grille Guard
- ZEON 12-S WINCH
- Warn Hawse Fairlead Black
- JL WINCH MOUNT KIT by Maximus-3
- JL FILLER TRIM PLATES – ZEON & EVO by Maximus-3
- JL WINCH HOOK ANCHOR by Maximus-3
Undecided
- ARB Twin Compressor
- Mountain Off-Road Compressor Mount. Seeing if AAL finishes their 392 mount anytime soon.
- Expel Protective Film. Getting estimates around $6,000.00. More than I want to spend for paint protection right now.
- Spare relocation by Rough Country. Not needed until tire upgraded.
- 37" BFG KO2 C Rated Tires. I will be driving stock tires for a couple months.
- Cargo Shelf by AAL. I have a Turtleback Getaway trailer being built. Might not need this.
- Tazor Mini or AEV for software.
- Better side steps/rock rails.
- Trunk lighting by Oracle Lighting.
- Headliner by Hot Heads.
- Mopar stitched leather dash. Waiting to see it installed in some else's 392.
No I did not. Okay I will add both of these to my list. No major rock crawling but anywhere it can take me and my Turtleback Getaway trailer to. The trailer has the Icon suspension system. I may eventually add an Icon system to the Jeep as well, but that wouldn't be for awhile. Not sure if they even have one for the weight of the 392 yet.Yeah, definitely skid plates. Low profile oil pan drain bolt too.
Did you get the XR package?
The oil pan drain bolt would be a no brainer for sure then.No I did not. Okay I will add both of these to my list. No major rock crawling but anywhere it can take me and my Turtleback Getaway trailer to. The trailer has the Icon suspension system. I may eventually add an Icon system to the Jeep as well, but that wouldn't be for awhile. Not sure if they even have one for the weight of the 392 yet.
Do you have a link to that?The oil pan drain bolt would be a no brainer for sure then.
Sounds like you got it mostly covered.
https://www.jlwranglerforums.com/fo...-low-hanging-oil-drain-plug-on-the-392.71645/Do you have a link to that?
Sweet!! Thank you. Just ordered it. Just a little body armor and I should have everything. I really want to do the Expel but 6 grand?
For 6 grand it isn't worth it to me. It might be worth it to you.Sweet!! Thank you. Just ordered it. Just a little body armor and I should have everything. I really want to do the Expel but 6 grand?