AJ_4xE
Well-Known Member
I installed the eBay bumper on my 4Xe with no issue and I used the blue tow hooks off of the plastic bumper. I also installed a Warn winch using the eBay bumper winch plate. I did go and but grade 8 bolts to replace the cheaper bolts that were sent with the eBay bumper. There is a high chance that the bumper will come slightly damaged so you might have to buy some high heat black textured spray paint to touch up some areas before install. I can’t speak for the install of the ROAM stuff as I don’t have anything from ROAM. I reused my LED lights and harness instead of the fog lights that came with the bumper just as a preference. I also bought the OEM crush can bezel pieces so I would not have the parking sensor holes. The plastic pieces cost like $13 each from quadratec or mopar.
Thank You... and your jeep looks beautiful. I have a Granite JLUR on order. The steel bumper defenitely looks better than the stock.
As someone who has only touched the steering wheel and the doors in a SUV, am little worried on doing the installs myself. Coiuld you comment on the below pls
2) Do I need a lift for installing the above items, or can I knock it off in my garage floor.
3) I have a Milwaukee M12 3/8 Drill/Driver and a 1/4 Hex Impact Driver. Planning to buy the tekton Torque wrenches based on few reccomendations from this forum. Do I need all the 3 wrenches in the below package or a 1/4 and 3/8 will do for the work that I am planning for?
https://www.tekton.com/torque-wrench-bundle-trq99901
Could you share the ebay seller name as well. I could see few selling same bumper, all shipped from CA
Sponsored
Last edited: