Today is 4XE Lift / Wheel / Tire day!!!

[seannaz]

That's interesting. I returned the AEV 2 inch spacer lift with the procal because AEV couldn't tell me for sure if the procal unit would work with the 4XE. After listening to you, I am glad I did. Decided to go with the Mopar two inch as well. Just waiting for mine to come in. Do you know if they had any issues with the alignment of the 4XE as they did with the similar Mopar ice kits? Trying to decide whether or not I need to add a front track bar. Jeep looks awesome!

No alignment issues that I’ve experience. I will say with this lift / tire setup, it drives smoother and tracks straighter than stock.

Sponsored

 

[hoag4147]

Interesting. Talked to my tech - I’m going bring it back into the shop and have them retourque everything. Figure out what’s up with the swaybar alignment. And yeah, this should be the post recall kit.

It almost appears they didn’t install the new LCAs that come with mopar lift.

 

[seannaz]

It almost appears they didn’t install the new LCAs that come with mopar lift.

Hmmm - anyway to identify if that’s the case? Part #, etc?

 

[hoag4147]

Hmmm - anyway to identify if that’s the case? Part #, etc?

Look on inside of LCA and see if part number is 68322798AA

 

[hoag4147]

Hmmm - anyway to identify if that’s the case? Part #, etc?

Does the spring appear to be bowing forward?

 

[seannaz]

Look on inside of LCA and see if part number is 68322798AA

Yes - same number. This is from the side with the issue (drivers). Passenger is like 1/2” of space.

 

[seannaz]

Does the spring appear to be bowing forward?

No, spring look good and straight.

 

[hoag4147]

No, spring look good and straight.

Okay. Strange. Hopefully they get it figured out for you

 

[hoag4147]

No, spring look good and straight.

Hard to tell in your pics but is the spring seated properly in the spring pad on bottom? Looks like it is but thought I would ask.

 

[richk225]

I was thinking the same on the spring not being seated correctly in the pocket, that would also affect the height of the Jeep from side to side but not by much
Awesome build!

 

[Sboden]

No alignment issues that I’ve experience. I will say with this lift / tire setup, it drives smoother and tracks straighter than stock.

I had the same experience with my Mopar lift on the last wrangler.

 

[richk225]

What do you all running the Nitto Ridge Grapplers think of the tire noise? I`m not familiar with them as far as riding in a Jeep with them, on a Raptor yes.
I have run BFG KO2`s and BFG KM3`s and both were on JK/JL and the KM3`s did make some noise on the highway, just wondering how the Nitto`s compare to them

 

[seannaz]

What do you all running the Nitto Ridge Grapplers think of the tire noise? I`m not familiar with them as far as riding in a Jeep with them, on a Raptor yes.
I have run BFG KO2`s and BFG KM3`s and both were on JK/JL and the KM3`s did make some noise on the highway, just wondering how the Nitto`s compare to them

Super quiet

 

[try4321]

noob question, looking at photos of 37s, I see tires are out of fenders a good 2 inches. Do they spray water everywhere during rain? does mud/water also hit side mirrors or near by cars?

 

[seannaz]

Update on front end noise...

So...apparently I wasn’t looking from the correct angle to check on spring alignment. This was supposed to be a post recall kit. Wondering if it’s not....

Sponsored