Sponsored

lightsout

Well-Known Member
Joined
Oct 1, 2018
Threads
46
Messages
1,731
Reaction score
1,551
Location
PNW
Vehicle(s)
2021 4xe Rubicon, 2018 Wrangler Sahara JL, Tesla S
Build Thread
Link
Spent the weekend on a few mods on the 4xe.

  • Teraflex 1.5" lift
  • XD Assault 18x9 wheels with 35 KO2's
  • RokBlokz XL Mud Flaps
  • Go Rhino Dominator D-6 Slider Removable Drop Steps
  • Diabolical Slipstream Security Enclosure
  • Barricade 3/4 Alloy Series Bumper
  • RC 10,000lb Winch
  • 17"LED Bar (bumper)
  • 40" LED bar (hood)
  • Dual 5" Cubes (window Cowl)
  • Rancho Adjustable front/rear Track bars
  • Teraflex adjustable front Lower control arms
  • RC Spare tire Relocation Bracket
  • Painted grill inserts Black
  • Rock Slide Engineering Rocker Armor
  • Full body 3M Paint Protection Film (PPF) wrap
  • Thule Pro 2 XTR Bike Rack
  • Bullet Point Phone Mount
  • Teraflex Falcon Steering Stabilizer

So far most of the above have not requires much modification to make fit the 4xe, However the Slipstream require alteration of the two floor mounting brackets. The Window Cowl LED Cube brackets also requires cutting and some minor reshaping as the charge port will not allow most if not all of the current brackets to work. Also not the Teraflex Lift is a 1.5" ST1 kit (2" front and 1.5" rear). As you can see any higher would not look right with 35's, in fact I and considering changing my rear to only 1" to eliminate the front rake, however I still have a steel rear bumper coming which like drop the rear a fraction. Yo should also note that a aftermarket bumper and winch will cause the front to sag about 1/2" so you should account for that when you lift. That gap between the tires and the fender flair is exactly 9" on all 4.
Jeep Wrangler JL Owners show off your new 4xe! IMG_3113


Jeep Wrangler JL Owners show off your new 4xe! IMG_3117


Jeep Wrangler JL Owners show off your new 4xe! IMG_3116


Jeep Wrangler JL Owners show off your new 4xe! IMG_3114


Jeep Wrangler JL Owners show off your new 4xe! IMG_3105


Jeep Wrangler JL Owners show off your new 4xe! LED Hood


Jeep Wrangler JL Owners show off your new 4xe! IMG_3101


Below are the Bestop 2-piece Fabric doors

Jeep Wrangler JL Owners show off your new 4xe! Soft Full Doors Top U


Jeep Wrangler JL Owners show off your new 4xe! Soft Half Doors Top U


Below are EAG Tub Doors


Jeep Wrangler JL Owners show off your new 4xe! Soft half Doors top down


Jeep Wrangler JL Owners show off your new 4xe! EAG doors Top u


Jeep Wrangler JL Owners show off your new 4xe! EAG doors top down
 
Last edited:

Jocko

Well-Known Member
Joined
May 25, 2018
Threads
4
Messages
433
Reaction score
477
Location
Boston
Vehicle(s)
Hydro Blue 4xe Rubicon
Spent the weekend on a few mods on the 4xe.

  • Teraflex 1.5" lift
  • XD Assault 18x9 wheels with 35 KO2's
  • RokBlokz XL Mud Flaps
  • Go Rhino Dominator D-6 Slider Removable Drop Steps
  • Diabolical Slipstream Security Enclosure
  • Barricade 3/4 Alloy Series Bumper
  • RC 10,000lb Winch
  • 17"LED Bar (bumper)
  • 40" LED bar (hood)
  • Dual 5" Cubes (window Cowl)
  • Rancho Adjustable front/rear Track bars
  • Teraflex adjustable front Lower control arms
  • RC Spare tire Relocation Bracket
  • Painted grill inserts Black
  • Rock Slide Engineering Rocker Armor
  • Full body 3M Paint Protection Film (PPF) wrap
  • Thule Pro 2 XTR Bike Rack
  • Bullet Point Phone Mount
  • Teraflex Falcon Steering Stabilizer

So far most of the above have not requires much modification to make fit the 4xe, However the Slipstream require alteration of the two floor mounting brackets. The Window Cowl LED Cube brackets also requires cutting and some minor reshaping as the charge port will not allow most if not all of the current brackets to work. Also not the Teraflex Lift is a 1.5" ST1 kit (2" front and 1.5" rear). As you can see any higher would not look right with 35's, in fact I and considering changing my rear to only 1" to eliminate the front rake, however I still have a steel rear bumper coming which like drop the rear a fraction. Yo should also note that a aftermarket bumper and winch will cause the front to sag about 1/2" so you should account for that when you lift. That gap between the tires and the fender flair is exactly 9" on all 4.
Jeep Wrangler JL Owners show off your new 4xe! EAG doors top down


Jeep Wrangler JL Owners show off your new 4xe! EAG doors top down


Jeep Wrangler JL Owners show off your new 4xe! EAG doors top down


Jeep Wrangler JL Owners show off your new 4xe! EAG doors top down


Jeep Wrangler JL Owners show off your new 4xe! EAG doors top down


Jeep Wrangler JL Owners show off your new 4xe! EAG doors top down


Jeep Wrangler JL Owners show off your new 4xe! EAG doors top down
Did you detail the outside with something (wax, ceramic, etc)? The black looks super deep in some of those pics!
 

Sponsored

supamyk

Well-Known Member
First Name
Mike
Joined
Apr 23, 2018
Threads
25
Messages
206
Reaction score
251
Location
Long Island
Vehicle(s)
2021 Rubicon 4xE
Spent the weekend on a few mods on the 4xe.

  • Teraflex 1.5" lift
  • XD Assault 18x9 wheels with 35 KO2's
  • RokBlokz XL Mud Flaps
  • Go Rhino Dominator D-6 Slider Removable Drop Steps
  • Diabolical Slipstream Security Enclosure
  • Barricade 3/4 Alloy Series Bumper
  • RC 10,000lb Winch
  • 17"LED Bar (bumper)
  • 40" LED bar (hood)
  • Dual 5" Cubes (window Cowl)
  • Rancho Adjustable front/rear Track bars
  • Teraflex adjustable front Lower control arms
  • RC Spare tire Relocation Bracket
  • Painted grill inserts Black
  • Rock Slide Engineering Rocker Armor
  • Full body 3M Paint Protection Film (PPF) wrap
  • Thule Pro 2 XTR Bike Rack
  • Bullet Point Phone Mount
  • Teraflex Falcon Steering Stabilizer

So far most of the above have not requires much modification to make fit the 4xe, However the Slipstream require alteration of the two floor mounting brackets. The Window Cowl LED Cube brackets also requires cutting and some minor reshaping as the charge port will not allow most if not all of the current brackets to work. Also not the Teraflex Lift is a 1.5" ST1 kit (2" front and 1.5" rear). As you can see any higher would not look right with 35's, in fact I and considering changing my rear to only 1" to eliminate the front rake, however I still have a steel rear bumper coming which like drop the rear a fraction. Yo should also note that a aftermarket bumper and winch will cause the front to sag about 1/2" so you should account for that when you lift. That gap between the tires and the fender flair is exactly 9" on all 4.
Jeep Wrangler JL Owners show off your new 4xe! 4B560ACF-47BE-4028-82A8-5F26D3CB6AE1


Jeep Wrangler JL Owners show off your new 4xe! 4B560ACF-47BE-4028-82A8-5F26D3CB6AE1


Jeep Wrangler JL Owners show off your new 4xe! 4B560ACF-47BE-4028-82A8-5F26D3CB6AE1


Jeep Wrangler JL Owners show off your new 4xe! 4B560ACF-47BE-4028-82A8-5F26D3CB6AE1


Jeep Wrangler JL Owners show off your new 4xe! 4B560ACF-47BE-4028-82A8-5F26D3CB6AE1


Jeep Wrangler JL Owners show off your new 4xe! 4B560ACF-47BE-4028-82A8-5F26D3CB6AE1


Jeep Wrangler JL Owners show off your new 4xe! 4B560ACF-47BE-4028-82A8-5F26D3CB6AE1
Looks Great!!!!
 

KaiyaKai

Well-Known Member
Joined
Jan 28, 2021
Threads
0
Messages
90
Reaction score
93
Location
USA
Vehicle(s)
2021 Chief Blue Rubicon 4XE
Jeep Wrangler JL Owners show off your new 4xe! 4B560ACF-47BE-4028-82A8-5F26D3CB6AE1

Added a Bestop and wheels. Get some narrow side steps and that will about do it for now.
What sidesteps did you get? Looks like they worked with the OEM Rubi rock rails.
 

cutandrun

Well-Known Member
First Name
Mark
Joined
Feb 24, 2021
Threads
2
Messages
78
Reaction score
134
Location
SoCal
Vehicle(s)
Porsche 911 turbo, Mercedes G550, Rubicon 4xe
What sidesteps did you get? Looks like they worked with the OEM Rubi rock rails.
I didn’t get them yet. I ordered Quadratec’s Brute Strength side steps but they are back ordered a couple of weeks. After waiting for my 4xe, this wait should be easy.
 

Sponsored

TTEChris

Well-Known Member
First Name
Chris
Joined
May 17, 2017
Threads
66
Messages
2,154
Reaction score
5,103
Location
Houston, TX
Website
www.tankcustoms.com
Vehicle(s)
2021 JTD & 2021 4XE
Vehicle Showcase
5
Still have a good way to go, but current progress pic next to our EcoDiesel
Jeep Wrangler JL Owners show off your new 4xe! IMG_0827

17" Weld Wheels, 37" KO2's, RC 2.5"(temporary) Rival4x4 aluminum front bumper, and warn VR-EVO 10s
 

lightsout

Well-Known Member
Joined
Oct 1, 2018
Threads
46
Messages
1,731
Reaction score
1,551
Location
PNW
Vehicle(s)
2021 4xe Rubicon, 2018 Wrangler Sahara JL, Tesla S
Build Thread
Link
Those of you looking for summer mods, I have 3 sets of doors this will give a look at some options. Pictures are the Stock doors of course, EAG Tube Doors, and the Bestop 2-piece fabric doors. If you want aftermarket doors buy them NOW. Every year they seem to sell out for the summer in May. I highly recommend the EAG doors.

Jeep Wrangler JL Owners show off your new 4xe! Hard Dpprs Top UP


Jeep Wrangler JL Owners show off your new 4xe! EAG doors Top u


Jeep Wrangler JL Owners show off your new 4xe! EAG doors top down


Jeep Wrangler JL Owners show off your new 4xe! Soft Full Doors Top U


Jeep Wrangler JL Owners show off your new 4xe! Soft Half Doors Top U


Jeep Wrangler JL Owners show off your new 4xe! Soft half Doors top down
 
OP
OP

eLECTRICON

Guest
Spent the weekend on a few mods on the 4xe.

  • Teraflex 1.5" lift
  • XD Assault 18x9 wheels with 35 KO2's
  • RokBlokz XL Mud Flaps
  • Go Rhino Dominator D-6 Slider Removable Drop Steps
  • Diabolical Slipstream Security Enclosure
  • Barricade 3/4 Alloy Series Bumper
  • RC 10,000lb Winch
  • 17"LED Bar (bumper)
  • 40" LED bar (hood)
  • Dual 5" Cubes (window Cowl)
  • Rancho Adjustable front/rear Track bars
  • Teraflex adjustable front Lower control arms
  • RC Spare tire Relocation Bracket
  • Painted grill inserts Black
  • Rock Slide Engineering Rocker Armor
  • Full body 3M Paint Protection Film (PPF) wrap
  • Thule Pro 2 XTR Bike Rack
  • Bullet Point Phone Mount
  • Teraflex Falcon Steering Stabilizer

So far most of the above have not requires much modification to make fit the 4xe, However the Slipstream require alteration of the two floor mounting brackets. The Window Cowl LED Cube brackets also requires cutting and some minor reshaping as the charge port will not allow most if not all of the current brackets to work. Also not the Teraflex Lift is a 1.5" ST1 kit (2" front and 1.5" rear). As you can see any higher would not look right with 35's, in fact I and considering changing my rear to only 1" to eliminate the front rake, however I still have a steel rear bumper coming which like drop the rear a fraction. Yo should also note that a aftermarket bumper and winch will cause the front to sag about 1/2" so you should account for that when you lift. That gap between the tires and the fender flair is exactly 9" on all 4.
Jeep Wrangler JL Owners show off your new 4xe! Soft half Doors top down


Jeep Wrangler JL Owners show off your new 4xe! Soft half Doors top down


Jeep Wrangler JL Owners show off your new 4xe! Soft half Doors top down


Jeep Wrangler JL Owners show off your new 4xe! Soft half Doors top down


Jeep Wrangler JL Owners show off your new 4xe! Soft half Doors top down


Jeep Wrangler JL Owners show off your new 4xe! Soft half Doors top down


Jeep Wrangler JL Owners show off your new 4xe! Soft half Doors top down


Below are the Bestop 2-piece Fabric doors

Jeep Wrangler JL Owners show off your new 4xe! Soft half Doors top down


Jeep Wrangler JL Owners show off your new 4xe! Soft half Doors top down


Below are EAG Tub Doors


Jeep Wrangler JL Owners show off your new 4xe! Soft half Doors top down


Jeep Wrangler JL Owners show off your new 4xe! Soft half Doors top down


Jeep Wrangler JL Owners show off your new 4xe! Soft half Doors top down
I love it, Looks sharp. The larger rim might be an uncomfortable ride but still looks nice.
So if that is a spring lift you only gained .5" of lift. Rubicon springs are 1" longer than basic OEM springs. So basically you removed a 1" lift kit for a 1.5" lift kit. If its spacer then you obviously gained 1.5 inches.
 
 



Top