STING GRAY Wrangler JL Club

[Elk666]

Added hood and side vents decals from pixeldecals and front alien sun shade

Sponsored

 

[ThirtyOne]

Added hood and side vents decals from pixeldecals and front alien sun shade

I ordered the same decal. Was it hard to install?

 

[OH-stinggray-IO]

Querstion: I just got 285/70/R17 new Tires ( General Grabbers) for my JLUS and I was looking at these wheels + spacers. I wanted to get spacers to give that small extra bulge ,but as I am doing research i understood that no need for that since these wheels have 4+ inches of backspacing and would give that look without it.I just wanted to confirm since you have it.Did you place any spacers on yours or is that how it will look.Could not find this Color, tyre, Wheel, stock lift pic anywhere. Thanks

No spacers just the wheels.
just remember all tires look/are different sizes even in the same size.

 

[RIVICON]

Just finished installing EAG slider/steps and RC spare tire relocation bracket to get ready for 35s and a lift tmrw. I highly recommend investing in an induction bolt heater. Alot of people have been snapping off the front body bolt because it's has red loctite on the threads. The induction bolt heater softened the loctite and bolt just screwed right out no problem.

 

[NMPirate]

Just finished installing EAG slider/steps and RC spare tire relocation bracket to get ready for 35s and a lift tmrw. I highly recommend investing in an induction bolt heater. Alot of people have been snapping off the front body bolt because it's has red loctite on the threads. The induction bolt heater softened the loctite and bolt just screwed right out no problem.

I really like those steps. Do they fit on with the stock Rubicon rails or do you have to remove them?

 

[Elk666]

I ordered the same decal. Was it hard to install?

not really,take your time, i applied the black on the red before applying on the jeep.

 

[ThirtyOne]

not really,take your time, i applied the black on the red before applying on the jeep.

Did you put them both on wet?

 

[StinggrayRubi77]

Dual top group so you get winter and spring mode! Picked it up in February this year. Loved the color, when detailed it’s like liquid metal...

 

[flyer92]

With the exception of trailer tow/HD electrical and rock sliders, my 2-door Sport is about as vanilla as they come...but Sting-Gray nonetheless!

 

[RIVICON]

I really like those steps. Do they fit on with the stock Rubicon rails or do you have to remove them?

You have to remove the Rubi rails. I love the look and they're sturdy as heck. I weigh 230lbs and I was jumping up and down on these after install and they didn't budge. The Rubi rails weigh 26lbs each and the EAG ones 35lbs each so I'm only adding 18lbs.

 

[JLTraveler]

So true. Will get a pic up soon!

Here it is!

 

[Elk666]

Did you put them both on wet?

yes i did, i used some windex

 

[Bloody Marty]

With the exception of trailer tow/HD electrical and rock sliders, my 2-door Sport is about as vanilla as they come...but Sting-Gray nonetheless!

I love the Jeep you have. Build it as needed. Enjoy!!

 

[Col_Sanders]

Poser shot right after lift:

Moab (Hell's Revenge I think)

Also ran Metal Masher, Steel Bender, Moab Rim, and Fins n Things. Smashed the exhaust tip and put a few more marks on the rear bumpers, wheels, and undercarriage but it was a blast!

 

[teacherjeepgirl]

Well here it is! It’s finally home!

Sponsored