CB or GMRS Mic hangers

[dchemphill1]

What is going on with Mic hangers....they appear to sold out of everything. Any ideas where you can get a good one that does not require drilling into the dash?

Sponsored

 

[BullMoose1776]

Idk if magnetic mic is sold out, or available. You will need to drill 2 small holes, but it is an ideal solution.

Alternatively, magnetic tape, and a magnet on the radio mic is a pretty effective solution as well.

 

[JeepinJason33]

What CB are you planning on running?

 

[dpike]

give Topsy a poke, theirs were suppose to be back in stock mid February.

 

[dchemphill1]

What CB are you planning on running?

I have the Midland GMRS 275

 

[UNC Rubicon]

I have the Midland GMRS 275

Im using the passenger grab handle mount from JeepUniq. It’s sturdy and doesn’t slide around.

https://jeepuniq.com/collections/jeep-jl/products/midland-mxt275-gmrs-mic-k18jl

 

[DanW]

Im using the passenger grab handle mount from JeepUniq. It’s sturdy and doesn’t slide around.

https://jeepuniq.com/collections/jeep-jl/products/midland-mxt275-gmrs-mic-k18jl

Those are expensive, but they are outstanding. Rock solid!

 

[Crawldad]

i'm gonna drill lol

https://magneticmic.com/

 

[dchemphill1]

Im using the passenger grab handle mount from JeepUniq. It’s sturdy and doesn’t slide around.

https://jeepuniq.com/collections/jeep-jl/products/midland-mxt275-gmrs-mic-k18jl

My wife is not excited about the location of that holder. Seems to hang right in to the passenger leg space area. I have it a look but a no go at this point. I also looked at the bullet point mounting system which I use for my phone and a camera but they are sold out of arms and the mic holder.

 

[BadA$$Rubi]

What is going on with Mic hangers....they appear to sold out of everything. Any ideas where you can get a good one that does not require drilling into the dash?

CoolTech #JL18CTMICM, JL Mic Mount Bracket, $28.00. Does not include the mic clip and will have to drill holes into the bracket to accommodate the clip. Installing the bracket on the grab handle requires partial removal of the A/C cluster face plate. Trim tools are required and be gentle but forceful. The mic is intrusive to the radio tune knob and most likely will bump your radio station selection. I rate it a 7 out of 10.

 

[dchemphill1]

Found this one but don't know if it is any good. https://www.amazon.com/dp/B07KF6D33...abc_3X468F0AMZDYTZ3JD2KM?_encoding=UTF8&psc=1

 

[BadA$$Rubi]

Found this one but don't know if it is any good. https://www.amazon.com/dp/B07KF6D33...abc_3X468F0AMZDYTZ3JD2KM?_encoding=UTF8&psc=1

Well shit! Same bracket, 1/2 the price and you get the clip. I suck!

 

[Larrymuld]

Found this one but don't know if it is any good. https://www.amazon.com/dp/B07KF6D33...abc_3X468F0AMZDYTZ3JD2KM?_encoding=UTF8&psc=1

I purchased this one a year ago and have not had any issues. It was easy to install with the same radio installed.

 

[Lgkaos]

I didn't want to drill into my dashboard either and the double-sided tape that came w/the Midland holster was too weak. I tried some stronger double-sided tape from Home Depot but that eventually gave out as well.

Ultimately, the fix was 2 small pieces of hook/loop velcro that has held like a champ.

 

[Ct_Formula]

i'm gonna drill lol

https://magneticmic.com/

That is awesome!! I have been getting stick on cell phone mount magnets and putting them on the mic posts.

Thanks for the link!

Sponsored