redelses
Well-Known Member
- Joined
- May 29, 2018
- Threads
- 22
- Messages
- 288
- Reaction score
- 237
- Location
- St George UT
- Vehicle(s)
- 2023 JLUR
- Thread starter
- #1
Just wanted to share the recent install, in case others are considering similar or looking for photos of similar. 2021 JLUR, with @TeraFlex ST1 1.5" spacer kit (2" front, 1.5" back for 4-door, and included progressive bump stops), and 315/70/17 KO2s on the @Quadratec '41 wheels (17x8.5").
Install of the spacer kit was about 5 hours for me, mostly playing musical-jacks trying to raise vehicle, lower the axle to get springs out, and then raise them again and back and forth until everything was installed. Had to recenter steering wheel about 20 degree (was off to the left).
The tires stick out about 1-1.5" with the new wheels, and probably will need to do some rock-throw mitigation of some type.
First photo is after ST1 kit:
Second photo is before ST1 kit (w/315s on '41 wheels):
Third photo shows wheel poke (315s on '41 wheels):
Install of the spacer kit was about 5 hours for me, mostly playing musical-jacks trying to raise vehicle, lower the axle to get springs out, and then raise them again and back and forth until everything was installed. Had to recenter steering wheel about 20 degree (was off to the left).
The tires stick out about 1-1.5" with the new wheels, and probably will need to do some rock-throw mitigation of some type.
First photo is after ST1 kit:
Second photo is before ST1 kit (w/315s on '41 wheels):
Third photo shows wheel poke (315s on '41 wheels):
Sponsored