Kenny
Well-Known Member
I think you need to make the video pubic - got a message saying to ask for permission to viewI did a quick video on this if anyone is interested:
Sponsored
I think you need to make the video pubic - got a message saying to ask for permission to viewI did a quick video on this if anyone is interested:
Appreciate the review @Kenny. We are extremely proud of our high quality, American made, bolt-on accessories.@Maximus-3 GREAT product. The classic hoop feels robust and, at 2.5“ is much beefier than the others I considered. Installation was straight forward and it feels like it can really take a hit and protect the grill and lights. I think this is one of my best upgrades and certainly a favorite.
Which winch cover did you use and how did you get it on inside the bumper?All finished! Took longer than anticipated due to the U-clip removal but finally got it. Also, for anyone with a larger winch like the warn zeon 10s, it is extremely tight to get the reinforcement brackets installed. i finally went out and bought ratcheting box end wrenches.
But I think worth it! The instructions say I could use the factory bolts if I wanted to but they are not long enough for the holes with the reinforcement bracket. Factory bolts would have looked better, but small detail! Thanks maximus 3 - given the quality of my first purchase from you, I'll likely be ordering more.
it's the standard synthetic warn brand one for the zeon 10s - you have to finesse it with your hand in keeping ti flat and hook the edge over on the bottom of the winch and your'e good. Super tight though.Which winch cover did you use and how did you get it on inside the bumper?
I haveit's the standard synthetic warn brand one for the zeon 10s - you have to finesse it with your hand in keeping ti flat and hook the edge over on the bottom of the winch and your'e good. Super tight though.
I have the Warn Stealth cover with the Maximus-3 winch plate, JL Tow hooks, and stealth cover plates. I tried fitting the cover on to no luck. Wondering if I need to pull the bumper to get it on? I have a Zeon 10-S also.it's the standard synthetic warn brand one for the zeon 10s - you have to finesse it with your hand in keeping ti flat and hook the edge over on the bottom of the winch and your'e good. Super tight though.
Maximus-3 JL Classic Hoop mounted on 392 bumper in forward leaning position. The hoop offers excellent protection of the lights mounted to the Maximus-3 Dually Aux bracket.Introducing the new Maximus-3 JL Classic Hoop (part# JL1004HC)
This 100% bolt-on application for the OE Rubicon Steel Bumper adds both style and protection to your JL
The Maximus-3 JL Classic Hoop:
* Is made from heavy duty 2.5" steel tube
* Features a double bend
* TIG welded flanges
* Includes reinforcement brackets that tie the JL Classic Hoop to the chassis frame rails for added strength
* Comes with our signature dual coat finish: zinc primer base coat & textured black powder coat.
* No cutting, No drilling
* Does NOT require removing the bumper for installation
* Proudly made in the USA!
Compatible with our bolt-on Maximus-3 bumper light brackets:
* 10" LED Light Bar Brackets (part # JL1010LB) fits most 10" light bars with horizontal mounting studs.
* Dually Auxiliary Light Bracket (part# JL1007AB) mounts a pair of auxiliary lights with vertical mounting studs (up to 8" diameter lights)
Available now: https://maximus-3.com/jl-bumper-accessories-/jl-classic-hoop
We also have 2 other styles of JL hoops: the Maximus-3 JL Stinger and the Maximus-3 "SLP" Hoop (to be featured in an upcoming thread)
How did the install go?Maximus-3 JL Classic Hoop mounted on 392 bumper in forward leaning position. The hoop offers excellent protection of the lights mounted to the Maximus-3 Dually Aux bracket.
5 minute install. Easy. Starting to see some surface rust around the welds but I'm still loving it.How did the install go?
My hoop should be here tomorrow, and I have the same lights and bracket already mounted.
Thanks man5 minute install. Easy. Starting to see some surface rust around the welds but I'm still loving it.
Dang, surface rust? I’d expect better powder coating for that kind of price…5 minute install. Easy. Starting to see some surface rust around the welds but I'm still loving it.