@MitbackwardsThx for all the info in this thread.
Basic rookie question, assume you can run multiple grounds on the same point? Wiring two sets of lights (four total) this weekend and plan to use the same ground point for each set. Any issues?
You've checked to be sure that it's configured correctly in UConnect?Anyone have issues with any switches not working? They all light up but AUX1 won’t click the relay. I swapped the relay and checked the fuse. Also checked wiring behind the switch. Any ideas?
Yep, it’s in there and I can change my preferences.You've checked to be sure that it's configured correctly in UConnect?
Your Aux switches are fuse protected at either 15 amp or 40amp...Can I add more than one LED light to the same AUX switch? I’ve got a 21 JLUR with the Tow/Aux package.
If I have say a front bumper Light Bar and A Pillar Ditch Lights can they both be on AUX 3 or 4? I will have Rock Lights and Rack Lights for “camp” lighting as well.
How do we handle all the lights?
@Revtech100I have all 4 switches lighted up but switch 2 won’t power anything up. Fuses are good. Any suggestions on how to trouble shoot this?
@Revtech100I installed it myself. I’ll pull it and check. Only #2 switch doesn’t work. Thanks!
Im in a similar situation with switch 1. I can’t hear the relay click when I turn it in.I installed it myself. I’ll pull it and check. Only #2 switch doesn’t work. Thanks!