35" and 37" JL pics with lift kit

[jl_explorer]

If you didn't go full-send on the shocks that's a good thing. I'd get your heights dialed in right where you want them before investing big mooney in to some Gucci shocks. I would not have swapped springs if I had to somehow sell that set of King's just to fund another set of King's - hard pass

LMAO, good point.

Sponsored

 

[jl_explorer]

If you were asking if the front sits high I actually think its very close to level, just with the rubicon fenders sitting higher in the front on the Jeep than the rear it does look that way at times.

here’s a better side profile shot

 

[AlexJeepVB]

here’s a better side profile shot

Looking like it might be a tad high in the front. Just measure from the ground to the front and rear of the rock rail to see if there is any difference. If it really bothers you just get a new bumper and winch and problem solved.

 

[jl_explorer]

Looking like it might be a tad high in the front. Just measure from the ground to the front and rear of the rock rail to see if there is any difference. If it really bothers you just get a new bumper and winch and problem solved.

I have the mopar steel bumper and warn winch going in on the 25th. I also ordered a half in spacer for the rear, just to keep it level when it’s loaded up

 

[Plasmadaddy]

2.5" AEV Dualsport lift with AEV Borah satin black wheels and onyx protection rings.

 

[tatarin]

Realized I never contributed to this thread!!

315/70/17 KO2 on factory wheels with spidertrax spacers

Teraflex ST1 spacer lift with longer fox 2.0 shocks

 

[Samister]

AEV 2.5 inch Dualsport suspension, AEV (JK) Salta 17x8.5 wheels and BF Goodrich 37x12.50x17 KO2s.

I've got the @lodoffroad Destroyer on the front and back, with a Warn VR Evo 10s Winch to round it out.

I've been waiting a whole year to post in this thread!

Did you find a fix for the rear camera?

 

[FunWagon]

Do you have more pictures from different angles with tube doors and sides off like that? I really like this configuration.

Realized I never contributed to this thread!!

315/70/17 KO2 on factory wheels with spidertrax spacers

Teraflex ST1 spacer lift with longer fox 2.0 shocks

 

[PanamaJl]

EvoMfg stage 4 3.5” with king shocks and 37s Km3

 

[BullMoose1776]

Did you find a fix for the rear camera?

How so? When I accidentally cut the wire?

 

[tatarin]

Do you have more pictures from different angles with tube doors and sides off like that? I really like this configuration.

Thanks! Hope this helps

 

[actionplus]

Realized I never contributed to this thread!!

315/70/17 KO2 on factory wheels with spidertrax spacers

Teraflex ST1 spacer lift with longer fox 2.0 shocks

I'm getting the same tires next week to place it on the stock rubicon rims.
I see you mentioned spacers. So, it needs a spacer when switching to these tires?
Thanks

 

[tatarin]

I'm getting the same tires next week to place it on the stock rubicon rims.
I see you mentioned spacers. So, it needs a spacer when switching to these tires?
Thanks

If you don’t have a rubicon, yes you will need spacers to clear control arms

 

[actionplus]

If you don’t have a rubicon, yes you will need spacers to clear control arms

Ah, ok. I've got a Rubicon. Guess I won't need them. Thanks for the clearing that for me.

 

[Samister]

How so? When I accidentally cut the wire?

I remember you were asking how the spare would be mounted with the Salta’s... and now you have them mounted. How did you manage to do that? I didn’t know about the wire...

Sponsored