acenines3
Well-Known Member
According to the instructions you can remove them and use a different label.Can you change them or is it a once stuck on it's done deal?
According to the instructions you can remove them and use a different label.Can you change them or is it a once stuck on it's done deal?
Well done. What’s that plate between the drive shaft and muffler? I don’t have that one.Installed Metalcloak Undercloak skid system, Rigid D-Series PRO Midnight Spots on a KC HiLites A-pillar mount (wired to AUX 1), Rigid D-SS PRO Side Shooter LED Floods on the steel bumper (wired to AUX 2), Plasti-Dipped the grille black, and replaced 3 Synergy tie rod boots. Also drained and re-filled the transfer case.
I was going to buy the Mopar satin black grille, but my son talked me into spraying it with Plastic-Dip. Turned out pretty decent, we'll see how long it lasts.
Except for aiming the new lights, I'm done with mods for a few months!
Took 3 Springs for a stroll in the snow. Its a big thing for us to get this much.
Speaking of more pics, in the sense of female empowerment, I would like like to see more pics of @BbyGrlJJ working on her Jeep. We live in a world of male chauvinism and male privilege, so in order to help remedy this you should post pics of @BbyGrlJJ working on her jeep. Maybe in some high heels or an evening gown. And in the summer, less....for female empowerment.Installed a winch for @BbyGrlJJ - all details in our build thread. Wired up an isolator, using AUX1 to power ON/OFF and AUX3 to spool-in and AUX4 to spool-out:
In the respect of empowerment, i will relay the request! lolSpeaking of more pics, in the sense of female empowerment, I would like like to see more pics of @BbyGrlJJ working on her Jeep. We live in a world of male chauvinism and male privilege, so in order to help remedy this you should post pics of @BbyGrlJJ working on her jeep. Maybe in some high heels or an evening gown. And in the summer, less....for female empowerment.
I think I may have purchased a similar tailgate reinforcement, which did not come with any shims to keep the tailgate in place. What did you use to keep it aligned? I was thinking of picking up wood shims and just inserting across the bottom of the tailgate?Installed the "Mopal" tailgate reinforcement and the Smittybilt oversized spare tire adapter. The reinforcement is made of lightweight aluminum; the adapter of hreavy steel. The adapter weighs at least twice as much as the reinforcement.
The adapter has two positions: for 35 and 37-inch tires. This is set for 35-inch tires. The bump stops slide to adjust depending on wheel offset. I now have 3 CB antenna mounts: 1 on the reinforcement and 2 on the adapter
I used four of those plastic decal applicator squeegees. I have a half dozen of them laying around. I jammed two on either side.I think I may have purchased a similar tailgate reinforcement, which did not come with any shims to keep the tailgate in place. What did you use to keep it aligned? I was thinking of picking up wood shims and just inserting across the bottom of the tailgate?
Thanks. That plate covers the eTorque battery.Well done. What’s that plate between the drive shaft and muffler? I don’t have that one.
Any help would be appreciated. Looking for a front marker light Y splitter to plug and play Raptor like grille lights. Can’t find any for 2019 JLUR. Really don’t want to splice into wires.added some Hella ValueFit 500 LED driving lights and rugged ridge spartan side steps
Here's a link to Quadratec pre-runner grill lights. Have them myself. Quadratec Pre-Runner LED Light Kit for 18-21 Jeep Wrangler JL | QuadratecAny help would be appreciated. Looking for a front marker light Y splitter to plug and play Raptor like grille lights. Can’t find any for 2019 JLUR. Really don’t want to splice into wires.
Thank you. I have different lights I want to use would like a splitter to wired into?Here's a link to Quadratec pre-runner grill lights. Have them myself. Quadratec Pre-Runner LED Light Kit for 18-21 Jeep Wrangler JL | Quadratec
Well, if you happen to get lost, you'll be able to follow the trail of springs back to civilization. Just be sure to grab em on the way out, before @sf5211 comes along.Took 3 Springs for a stroll in the snow. Its a big thing for us to get this much.