Sector281411
Well-Known Member
- First Name
- Greg
- Joined
- Jul 28, 2019
- Threads
- 11
- Messages
- 103
- Reaction score
- 141
- Location
- Melissa, TX
- Vehicle(s)
- 2021 JT Gladiator Willy's Edition
- Thread starter
- #1
I finally got my Teyes CC2 head unit in and I am running into a bit of an issue. I think I was sent something incorrect or something not needed.
Below is a picture of the wiring harness for the unit and there is an offshoot that goes to the reddish color canbus box that is in the second image. The connector only has 16 pins, 2 rows of 8, on the harness and the box has 20 pins, 2 rows of 10.
For anyone that has installed this unit, is this box required to be connected and if so did your box have more than 16 pins? If you scan the qr code it says For 2014 Outlander, 2014 RVR, 2014 Lancer, 2019 Outlander.
I think I was sent the wrong item and is there a substitute I can use in its place?
Greg
Below is a picture of the wiring harness for the unit and there is an offshoot that goes to the reddish color canbus box that is in the second image. The connector only has 16 pins, 2 rows of 8, on the harness and the box has 20 pins, 2 rows of 10.
For anyone that has installed this unit, is this box required to be connected and if so did your box have more than 16 pins? If you scan the qr code it says For 2014 Outlander, 2014 RVR, 2014 Lancer, 2019 Outlander.
I think I was sent the wrong item and is there a substitute I can use in its place?
Greg
Sponsored