Sorry for the late reply. I have four bolts holding down the DFG slider. Three are using the bolt holes from the cargo hooks and I have one bolt through the tub in the rear of the slider on the other side. Been on a lot of trips and zero issues. I did have to trim the slider to fit. If I can find a pic I will add it later.How did you secure the slider? Did you remove the cargo hooks and use those bolt holes? I've been considering the DFG and Hooke so great to see.
Wow, that shelf looks awesome. Can you tell me the height adjustment range for it (Space on the bottom)? I want to make sure I can fit my fridge, but their website says TBD for the height.ARB 37, Goosegear plate, AAL fridge slide and AAL cargo shelf.
I have it mounted in the lowest possible spot and it is 18.5” from my Goosegear platform to the bottom lip of the shelf. With my 37qt on the AAL fridge slide I have a little over and inch clearance between the lid and bottom of the shelf. I included a picture of the side mount and how it is maxed out by the plastic rollbar covering. Moving it up to the max the bolts move up 2.5”, so at the max setting you would have 21” if you also had the Goosegear plate. So assuming you have a fridge slide that is low profile a 50qt ARB should fit well at the max setting. As for the AAL plate or stock floor I can’t speak to that. I was the 1st to order and ship, they actually shipped mine assembled since they used it for product shots for marketing.Wow, that shelf looks awesome. Can you tell me the height adjustment range for it (Space on the bottom)? I want to make sure I can fit my fridge, but their website says TBD for the height.
How long did it take to get yours?
Thanks Dude, that will work for my setup. Order placed! Hopefully the lead time is not too long.I have it mounted in the lowest possible spot and it is 18.5” from my Goosegear platform to the bottom lip of the shelf. With my 37qt on the AAL fridge slide I have a little over and inch clearance between the lid and bottom of the shelf. I included a picture of the side mount and how it is maxed out by the plastic rollbar covering. Moving it up to the max the bolts move up 2.5”, so at the max setting you would have 21” if you also had the Goosegear plate. So assuming you have a fridge slide that is low profile a 50qt ARB should fit well at the max setting. As for the AAL plate or stock floor I can’t speak to that. I was the 1st to order and ship, they actually shipped mine assembled since they used it for product shots for marketing.
ARB 37, Goosegear plate, AAL fridge slide and AAL cargo shelf.
Hey mate. Can you do me a favour. Can you measure the distance from the cargo shelf to the front seats? I need to know if I can fit my current dog crate in the backseat folded down area.I also have the AAL shelf, just installed couple days ago and absolutely loving it. I have it at the lowest possible setting too as my Roam box fits underneath, and to give more room up top. Once I get the fridge then I might have to adjust.
I’ll try to get the rack back in this week to take a measurement. Had to take it out to get a new deep freeze home.Hey mate. Can you do me a favour. Can you measure the distance from the cargo shelf to the front seats? I need to know if I can fit my current dog crate in the backseat folded down area.
Much appreciated mate.
It's 37.5 inches from the shelf directly to the back of the front seat, the topmost part of the seat before the headrest. Hope this helps.Hey mate. Can you do me a favour. Can you measure the distance from the cargo shelf to the front seats? I need to know if I can fit my current dog crate in the backseat folded down area.
Much appreciated mate.
curious what finish you ordered on that AAL rack?ARB 37, Goosegear plate, AAL fridge slide and AAL cargo shelf.
Textured black, got the Versatable in the same also.curious what finish you ordered on that AAL rack?
Just ordered the satin on mine. Your's almost looks 2 tone