they need to add the code but also install a wire to make the halo work, the part number for that wire in here on previous post, I bought mine headlights used and the halos didn’t work until I did all of that, I don’t have personal experience in the fender lights but as far as I know they are the same, just need to add the code to your jeep as wellI bought a 2018 Sahara JL under the promise my Jeep dealership would upgrade it to the LED package. They installed some takeoff headlights but the halos and the hi/lo combo won’t work. Do I need to have them add the sales code? They also tried to install takeoff led fender lights from another vehicle but said the harness is different. Can anyone confirm
X2 on the reprogram/sales code for headlights. I used tazermini. My right one flickered, no low beams with the high beams. All fixed after tazer. I never hooked up halos.they need to add the code but also install a wire to make the halo work, the part number for that wire in here on previous post, I bought mine headlights used and the halos didn’t work until I did all of that, I don’t have personal experience in the fender lights but as far as I know they are the same, just need to add the code to your jeep as well
Hey guys a lil late here. Just installed the OEM led headlights in my JLU, passenger side stays on high beams all the time. I have not wired the halo and do have the tazer. It would do the same before and I after I program it. Any suggestions??? Thanks in advance !I am still taking the time reading through all of this thread but did you solve this issue with your low beams cutting out when you turn on the high beams? I just did a swap and have the same thing going on