What did you do TO your Jeep JL today?

[03Indigo]

Wiring for LED DRLs?

the wiring and plug were included in the aftermarket kit. Lights were already installed in the fenders. Plug and play as far as wiring, no splicing needed, but required jscan adjustments to get lights operational as I didn’t have drl active and halogens.

 

[RagTopDeluxe]

Oh great... now I’m starving.......... you need me to send Colby to help with the wrenching, or you got it.....

Colby in those overalls !

 

[jludave]

the wiring and plug were included in the aftermarket kit.

Can you provide some info about the kit you used? Where to purchase?

 

[baconator_17]

Few small things today. Need to save some coin for some nice LEDs.

 

[PA-Punkn]

Quite an eventful few days in Jeep modding, so this is a bit of a wrap up.

Full PremiumShield Elite SH Paint Protection Gloss Wrap & Hood Flare
Rugged Ridge Elite Headlight Guards
Vector OffRoad Full Width E-Dock
67 Designs Phone Holders x2
GPCA GP-Grip PRO x2
Rubber tubing to close gap between fenders and body

 

[obwahn]

Oh great... now I’m starving.......... you need me to send Colby to help with the wrenching, or you got it.....

Colby! Rockin them overalls!

 

[Suffolklou]

Quite an eventful few days in Jeep modding, so this is a bit of a wrap up.

Full PremiumShield Elite SH Paint Protection Gloss Wrap & Hood Flare
Rugged Ridge Elite Headlight Guards
Vector OffRoad Full Width E-Dock
67 Designs Phone Holders x2
GPCA GP-Grip PRO x2
Rubber tubing to close gap between fenders and body

I had that welting in my fenders. It kept coming out. Finally removed it after losing one on the road.

 

[MacombRoger]

I had that welting in my fenders. It kept coming out. Finally removed it after losing one on the road.

I 2nd this... The welting for me has held up in back, I had to remove it in front, it never really stayed in there.

 

[baconator_17]

Also, gave her a bath, 50 and sunny in Mich it's a must do.

 

[PA-Punkn]

I 2nd this... The welting for me has held up in back, I had to remove it in front, it never really stayed in there.

Thanks for the feedback, maybe the wrap will help keep it seated better, we shall see

 

[hoag4147]

the wiring and plug were included in the aftermarket kit. Lights were already installed in the fenders. Plug and play as far as wiring, no splicing needed, but required jscan adjustments to get lights operational as I didn’t have drl active and halogens.

So you did the aftermarket flare kit from Mopar it sounds like. So no additional wiring to your Sport harness? Just needed to enable LED DRL options and all worked. Thanks

 

[JW12]

A few minor mods taken care of today...

1) Installed a Dynomax muffler elimination pipe.
2) Installed a VOFONO 9" Spiral Antenna (Amazon) and got rid of the factory unit.
3) Installed a Savadicar JL/JT Multifunction Drink/Phone Holder (Amazon), which will be used mainly as a phone mount.

I don't really need to say this to a group of Jeepers, but more to come.

 

[JeepU4IA]

I take it your making a joke? From Motorola's website

1930: First Motorola Brand Car Radio
In 1930 Galvin Manufacturing Corporation introduced the Motorola radio, one of the first commercially successful car radios. Company founder Paul V. Galvin created the brand name Motorola for the car radio -- linking "motor" (for motorcar) with "ola" (which implied sound). Thus the Motorola brand meant sound in motion.

Ola doesn't actually mean anything. It only "implied" sound because of Victrola phonographs which had been around since 1906. Motorola is not going to admit they piggybacked another company's name.

 

[OnlyOne]

Oh great... now I’m starving.......... you need me to send Colby to help with the wrenching, or you got it.....

I could send my two over but I’m sure nothing would get done.....

 

[Roky]

I could send my two over but I’m sure nothing would get done.....

That’s so cool, did they grow up together, looks like they been together for a long time.